Products

Manufacturers

Safety Direct

Found items: 18

1/4"-5/16" Vinyl Coated Anchor Sling /w Thimble Eyes on Each End

Safety Direct anchor slings are fabricated from galvanized vinyl coated aircraft cable. The Flemish eye splices are finished with pressed steel sleeves and have a minimum breaking strength of 5000 pounds (22.2 kilonewtons).

1¾” Polyester Dorsal Extension w/ Large Soft Eye & D Ring

1¾” Polyester Dorsal Extension w/ Large Soft Eye & D Ring

2" Polyester Web Anchor Strap, w/ Large Loop and Small D Ring

2" Polyester Web Anchor Strap, w/ Large Loop and Small D Ring

6' adjustable shock-absorbing lanyard, snap hooks both ends E6

Safety Direct's Kevlar shock-absorbing lanyards, are fire resistant and are used for welding, grinding sparks, abrasive surfaces, and high heat conditions. The snap hook nearest to the energy absorber attaches to the dorsal (back) D-ring of the harness and the other connects to the anchor point.

Crossover Style Full Body Harness (AD)

Crossover style full body harness, (AD), grommeted legs, pass through shoulder buckle - front & back D rings. 

 

Crossover Style Full Body Harness (ADP)

Crossover style full body harness, universal (ADLP) grommeted legs, pass through shoulder buckle - front, back & side positioning D rings.

Door & Window Anchor Bar

The MADW100 anchor bar is suitable for both door and window applications. It is designed for one worker only, but it is reusable, so it can be moved around the job site.

E4 - Adjustable 6' Energy Absorbing with Locking Snap Hooks Both Ends

The E4 energy absorbing lanyard is designed to reduce the forces on a human body during a fall to less than 900 pounds (4 kilonewtons) and limit the deployment length to a maximum of 42 inches (1067 millimeters).

These lanyards have a weight rating between 99 pounds (45 kilograms) and 254 pounds (115 kilograms) for a worker including all tools, clothing and personal protection equipment.

E4 - Adjustable 8' Energy Absorbing with Locking Snap Hooks Both Ends

The E4 energy absorbing lanyard is designed to reduce the forces on a human body during a fall to less than 900 pounds (4 kilonewtons) and limit the deployment length to a maximum of 42 inches (1067 millimeters).

These lanyards have a weight rating between 99 pounds (45 kilograms) and 254 pounds (115 kilograms) for a worker including all tools, clothing and personal protection equipment.

E6 - Adjustable 6' Energy Absorbing with Locking Snap Hooks Both Ends

 The E6 energy absorbing lanyard is designed for the heavier worker, having a weight rating between 200 pounds (91 kilograms) and 386 pounds (175 kilograms) for a worker including all tools, clothing and personal protection equipment.

The E6 limits the forces to less than 1350 pounds (6 kilonewtons) with a maximum deployment length of 72 inches (1830 millimeters).

Parachute Style Full Body Harness

Parachute style full body harness, polyester, class A, back D-ring, grommet legs.

Permanent Low Profile Roof Anchor

This low profile roof anchor is designed to be attached and covered with the ridge cap shingles. Since there is no penetration through the roof membrane, this anchor gives a leak proof installation. 

Re-Usable Lay Flat Roof Anchor

Re-Usable Lay Flat Steel, Single D Ring Roof Anchor

Retractable lanyard, 11ft w/1" Dyneema webbing, double lock carabiner and 3/4" snap hook.

Safety Direct's  Personal Fall Limiters (PFL's) or Self-Retracting Lanyards are one of the most versatile products for fall arrest situations. Safety Direct's retractables are designed as a single person fall protection device.

Rose - Crossover Style Full Body Harness

Crossover Harness c/w Back D, Oval Link, Shoulder Pads & Grommeted Legs.

Load More
Loading...

Quote
0
items